KRILL SPARK FLAME F3A DYN ORG CLEAR
KRILL SPARK FLAME F3A DYN ORG CLEAR
$2,999.99 Add to cart

KRILL SPARK FLAME F3A DYN ORG CLEAR

$2,999.99

Installments available between $20 - $1,500 with LatitudePay logo What's this?

In stock

Fast shipping

  • In Stock
  • 30 days easy returns
  • Low shipping from $9.95
  • Order before noon for same day dispatch

Description

 

AIRPLANE Information Table

RC World product configuration table (c) 2020

Type PATTERN F3A
Wingspan 1.9m
Length 1.99m
Scale  
Channels 4ch
Power setup 2.2 kw Electric only
Undercarriage Composite
Weight 4.9kg
Wing loading  
notes

 DESCRIPTION   SPARK DYNAMIC – „ NEW „F1″ ON F3A SKY”Fuselage: Fully composite, we have used a new technology of endless sandwich. Totally compact and incredibly light!As you may see, canopy has been moved forward to increase fuselage area around C of G.This has approved flying characteristics during a knife edge and all rolling circle manoeuvres.Another improvement was done in the front area of fuselage. Small size spinner and shallow angle of the bottom has increased dynamic looks of SPARK.It’s understandable that SPARK is meant for el.power, so because of this, we had to change back of the fuselage as well. Large removable canopy which begins few centimetres behind spinner allows for an easy motor and battery installation.Wings: This is where we have done the most work……Totally exlusive looks in F3A world. Final looks of the design after long experimenting with different platforms and airfoils. Main goal was to come up with something new and effective.Wings you see are light, extremely strong and incredibily „ smooth” in rough air.Part of the design is a system allowing for changing incidence. All composite structure with 30/1mm C/F tube and already mounted servo bays.Elevator: Platform similar to wing design but with lighter material use. All composite structure as well, allowing for installation of MINI servos inside the stabs.Of course there are other ways for ele. control: „ KATO MODELES”…see pictureRudder: All composite as well with new shape . After lots of thinking we decided to use a piano hinge, instead of a wire as used on our large models. Control horns are above the stabs.Landing gear: Lightened c/f sandwich, i.e. strong and light. Very practical mounting and attaching.Tail wheel assembly is functional and easy to install.Spinner: 64mm diameter. We have a selection of these available for el.motors. Gallery spinnerIf you choose a different make, make sure it not more them 65mm diameter and no more then 45 mm long!Canopy: Very light c/f and Styrofoam sandwich. Attaching is done either by your favoured method or by using 4 strong magnets.Recommended equipment:¨Prop: APC 22×12 for calm, 21×14 for windy conditions.Motor: Hacker A 60-22S or AXI 5330- 20,22,24Regulator: Hacker EVO 90-0-Acro or JETI-SPIN 99Battery: 4500mAh 10s for calm and 4900mAh for windy conditions.Servos: digital at least 7kg.Voltage regulator: we recommend Digi switch from POWER BOX SYSTEMKit contents ( see gallery pictures ): Fuselage , Rudder , Canopy , Wings , Elevator , Carbon fibre wing tube , Landing gear, Whell pantsAccessories: Wheels and axels ,Tail wheel , Screws ,Control horns +small hardware (screws ….) BONUS: protective bags for your plane…for the wings and for the elevator .