Installments available between $20 - $1,500 with LatitudePay logo What's this?

3 in stock


A very fast drying primer with excellent corrosion inhibiting pigment for ferrous and non-ferrous metals. Because of its outstanding adhesion to almost every surface NoRust is the preferred primer for most paint systems. Suitable for all areas other than those of continuous immersion.

NoRUST ALL SURFACE PRIMERDESCRIPTION: A state-of-the-art ALL SURFACE PRIMER It contains superior non toxic inhibitingpigments and is formulated to resist humidity and salt spray conditions. Because ofNoRUST’s outstanding adhesion it can also be used as a primer for non-ferrousmetals and as a stain sealer.USES: Stainless Steel – Cast Iron – Aluminium – Weathered Galvanised Iron – Bronze -Timber and many other substrates.PROPERTIES (at 20C)COLOUR: Red Oxide White & GreyTOXICITY: Non Toxic pigmentsFINISH: Low sheen TextureCOVERAGE: 10m2 per litre (D.F.B. 40 microns)DRYING TIME: Touch dry 20 minutes at 20°CRECOATING: 2 – 3 HOURS – (24 hours if a 2 pack is to be brush applied) Allow longer if volatile 2pack spraying thinners are to be used.THINNING: Maximum of 5% WEATHERFAST BRUSHING THINNERS if brushed or rolled. Forspraying reduce 25-33 1/3% with only WEATHERFAST SPRAYING THINNERS.Do not substitute other SolventsWEIGHT/LITRE: 1.320kgVOLUME SOLIDS: 36%FLASH POINT: 27CCLEAN UP: WEATHERFAST BRUSHING THINNERS or WEATHERFAST SPRAYINGTHINNERS APPLICATION: Brush & Roller: Stir thoroughly and apply straight from the can immediately afterthe surface has been prepared. In hot weather up to 5% of Weatherfast BrushingThinners can be added to assist flow. At 20C a second coat may be applied after 3hours. On metals 3 coats should be applied at right angles between coats. In colderconditions allow longer drying time between coats.Spray: Thin to the appropriate viscosity (20-30% according to the pressure systemused) with NORGLASS WEATHERFAST SPRAYING THINNERS. DO NOTSUBSTITUTE OTHER THINNERS, as they will be incompatible.Overcoating: Further coats of NoRust may be applied after 2 hours. However, ifa 2 pack product is to be used allow at least 24 hours before continuing.

Notify me We will inform you when the product arrives in stock. Just leave your valid email address below.
Email We won't share your address with anybody else.
RC World Hobbies - Tates Toys pty ltd. 135 Shannon Ave Geelong West Vic 3218 Aust Ph(03) 5222 4201 ABN 80007437523 - Copyright ©2018 RCWorld